Job Summary
Published On : Aug 20, 2026
No. of Vacancies : 04
Job Type :
Full Time
Job Level :
Age : 28 to 35 years
Location : Gazipur
Gender : Male
Salary Range:
Negotiable
Application Deadline : Sep 8, 2026
Officer/Sr. Officer-Quality (Knit Garments)
One of the Largest knit Garments Factory
No. of Vacancies
04
Job Description / Responsibility
- A. Quality Control – Sewing
- Monitor quality performance throughout the sewing production process.
- Conduct inline, end-line, and patrol inspections according to approved quality standards.
- Ensure sewing operations are performed according to approved sample, tech pack, specification sheet and workmanship standards.
- Identify and control major sewing defects such as:
- Open seam
- Broken stitch
- Skipped stitch
- Uneven stitch
- Puckering
- Uneven SPI
- Raw edge
- Seam slippage
- Needle damage
- Oil/stain marks
- Measurement deviation
- Wrong attachment/component
- Unbalanced garment
- Verify critical operations and establish additional checkpoints where required.
- Monitor defect rates and take immediate action when quality performance falls below the acceptable level.
- Ensure defective garments are properly segregated, identified and sent for correction.
- B. Quality Control – Finishing
- Monitor quality from thread trimming through final finishing and packing.
- Inspect garments for:
- Stains and dirt
- Loose threads
- Pressing/ironing defects
- Shape and appearance
- Measurement deviations
- Label and ticket errors
- Folding defects
- Packing defects
- Assortment mistakes
- Shade variation
- Garment damage
- Ensure finishing and packing comply with buyer requirements and approved standards.
- Conduct final/random inspections before shipment as instructed.
- Ensure garments are properly presented and packed according to buyer specifications.
- C. Measurement & Specification Control
- Check garment measurements against the approved measurement chart/specification.
- Ensure operators and production teams understand critical measurement points.
- Monitor measurement deviations and immediately communicate significant issues to Production and Quality Management.
- Verify measurement after alteration/rework.
- Maintain measurement inspection records.
- D. Defect Analysis & Corrective Action
- Record and analyze sewing and finishing defects on a daily basis.
- Prepare defect-wise and line-wise quality reports.
- Identify recurring defects and initiate root-cause analysis.
- Apply 5 Why, Fishbone/Ishikawa or other appropriate RCA techniques.
- Coordinate with Production and relevant departments to implement corrective and preventive actions.
- Follow up corrective actions until the defect is permanently controlled.
- Monitor the effectiveness of corrective actions.
- E. Quality Improvement
- Drive reduction of DHU, defect rate, rework, alteration and rejection.
- Identify quality bottlenecks and recurring problem areas.
- Conduct quality improvement meetings with Production teams.
- Recommend process improvements to reduce defects at source.
- Support implementation of Right First Time (RFT) and zero-defect initiatives.
- Share quality trends and improvement opportunities with the Quality Manager.
- F. Inline & End-Line Quality Management
- Ensure quality checkpoints are properly maintained in assigned sewing lines.
- Monitor inline inspectors and quality checkpoints.
- Ensure end-line inspection is performed according to established procedures.
- Review quality reports and take immediate action on abnormal results.
- Ensure no defective garments move to the next process without proper disposition.
- G. Pre-Production & New Style Support
- Participate in Pre-Production Meeting (PPM) and style briefing where required.
- Review approved sample, buyer comments, measurement specifications and workmanship requirements.
- Identify potential quality risks before bulk production.
- Ensure critical quality points of new styles are communicated to relevant Quality and Production personnel.
- Support first-piece/first-output approval before bulk production.
- H. Audit & Compliance Support
- Support internal, buyer and third-party quality inspections/audits.
- Ensure quality records are properly maintained and readily available.
- Participate in factory quality audits and prepare corrective action plans.
- Ensure quality procedures are followed in sewing and finishing areas.
- I. Team Coordination & Communication
- Coordinate with Production, IE, Technical, Planning, Merchandising, Cutting, Finishing and Maintenance teams on quality issues.
- Conduct regular communication with line supervisors and production personnel regarding quality problems.
- Escalate critical quality issues to the Quality Manager immediately.
- Provide guidance and technical support to Quality Officers, Inspectors and Checkers.
- Maintain effective communication between Sewing and Finishing Quality teams.
- J. Training & Development
- Conduct on-the-job quality awareness sessions for inspectors and production personnel.
- Train quality inspectors on defect identification, inspection methods and buyer requirements.
- Support operator/supervisor training on recurring quality problems.
- Develop awareness regarding quality at source and self-inspection.
Educational Requirements
Additional Job Requirements
- Age 28 to 35 years
- Only Male
Location
Gazipur
Salary Range
Negotiable
Job Source
Bdjobs.com.bd Online Job Posting
Application Deadline : Sep 8, 2026
Company Information
Company Name:
One of the Largest knit Garments Factory
